国外PTFE标准
标准号 | 标准名称 | 英文名称 |
ASTM D1675-03(2011) | 聚四氟乙烯管的试验方法 | Test Methods for Polytetrafluoroethylene Tubing |
ASTM D2686-06(2012) | 聚四氟乙烯压敏电绝缘胶带规范 | Specification for Polytetrafluoroethylene-backed Pressure-Sensitive Electrical Insulating Tape |
ASTM D1710-08 | 聚四氟乙烯(PTFE)基本型材,棒材和厚壁管材 | Polytetrafluoroethylene (PTFE) Basic Shapes, Rod and Heavy-Walled Tubing |
ASTM D3295-06(2011) | 聚四氟乙烯管 | Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
ASTM D3369-01 | 聚四氟乙烯树脂浇铸薄膜 | Polytetrafluoroethylene (PTFE) Resin Cast Film |
ASTM D4441-04(2010) | 聚四氟乙烯的水分散体规范 | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
ASTM D4745-11 | 聚四氟乙烯模压和挤出材料的填充化合物 | Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials |
ASTM D4894-07 | 聚四氟乙烯造粒料和柱塞挤出料规范 | Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram |
ASTM D4895-10 | 聚四氟乙烯分散树脂规范 | Specification for Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion |
ASTM D4969-07(2012) | 聚四氟乙烯(PTFE)涂覆玻璃织物 | Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric |
ASTM D3308-12 | 聚四氟乙烯车削膜 | Standard Specification for PTFE Resin Skived Tape |
ASTM D6040-12 | 非烧结聚四氟乙烯(PTFE)挤出薄膜或带的试验方法 | Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D6457-08(2013) | 聚四氟乙烯挤出和模压棒和厚壁管 | Specification for Extruded and Compression Molded Rod and Heavy Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
ANSI/ASTM D1457-1992 | 聚四氟乙烯(PTFE)模塑和挤出材料规范(08.01) | Specification for Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.01) |
ANSI/NEMA HP3-2000 | 电子和电气用ET(250V)、E(600V)和EE(1000V)型PTFE(聚四氟乙烯)绝缘高温架空电线 | Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire, Types ET (250 Volt), E (600 Volt) and EE (1000 Volt) |
ASTM D1457-1992 | 聚四氟乙烯模塑及挤压成型物料 | Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials |
ASTM D3293-1991 | 聚四氟乙烯树脂模压薄板 | PTFE Resin Molded Sheet |
ASTM E911-1998 | 有聚四氟乙烯(PTFE)插头的玻璃管旋塞阀标准规范 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
ASTM D1710-2002 | 挤制和压模聚四氟乙烯(PTFE)杆材和厚壁管材的标准规范 | Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing |
ASTM D3294-2003 | 聚四氟乙烯树脂模压薄板和基本模压型材的标准规范 | Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes |
ASTM D6457-2004 | 聚四氟乙烯制挤压和压缩模塑杆和厚壁管的标准规范 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
ASTM D6585-2005 | 非烧结聚四氟乙烯(PTEE)挤制薄膜或带材的标准规范 | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D7193-2005 | 非饱和加色剂的聚四氟乙烯(PTFE)挤制薄膜或窄条带材的标准规范 | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D1675-2003 | 聚四氟乙烯管的标准试验方法 | Standard Test Methods for Polytetrafluoroethylene Tubing |
ASTM D2686-2006 | 聚四氟乙烯背面压敏电绝缘胶带的规范 | Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape |
NF C93-643-145-2002 | 绝缘软套管.第3部分:各种型号套管的规范.表145-147:挤压聚四氟乙烯套管 | (Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 145 to 147 : extruded PTFE sleeving.) |
NF C93-643-201-1993 | 软绝缘套筒规范.第3部分:专用套筒的规范要求.第240 -243 活页:热收缩聚四氟乙烯(PTFE)套筒 | (Specification for flexible insulating sleeving. Part 3 : specification requirments for individual types of sleeving. Sheet 201 : heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1.) |
NF E29-902-3-1997 | 法兰及其接头.PN指定法兰用垫圈的尺寸.第3部分:非金属聚四氟乙烯封装垫圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 3 : non-metallic PTFE envelope gaskets.) |
NF S60-202-1994 | 防火.灭火介质.卤代烃.第1部分:聚四氟乙烯1211和聚四氟乙烯1301规范 | (Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Part 1 : specification for halon 1211 and halon 1301.) |
NF C93-643-240-2003 | 绝缘软管.第3部分:各种型号软管规范.第240至243篇:热收缩聚四氟乙烯绝缘软套管(PTFE) | (Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 240 to 243 : heat-shrinkable PTFE sleeving.) |
NF S60-205-1994 | 防火.灭火介质.卤代烃.第2部分:聚四氟乙烯1211和聚四氟乙烯1301安全操作和运输规程的实施标准 | (FIRE PROTECTION. FIRE EXTINGUISHING MEDIA. HALOGENATED HYDROCARBONS. PART 2 : CODE OF PRACTICE FOR SAFE HANDLING AND TRANSFER PROCEDURES OF HALON 1211 AND HALON 1301. (EUROPEAN STANDARD EN 27201-2).) |
NF T47-820-7-2001 | 结构轴承.第7部分:球柱和滚柱聚四氟乙烯轴承 | (Structural beairings - Part 7 : spherical and cylindrical PTFE bearings.) |
NF C93-585-2-2002 | 射频电缆.规范.第2部分:聚四氟乙烯绝缘的半硬性射频和同轴电缆.分规范 | (Radio-frequency cables - Specifications - Part 2 : semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification.) |
NF T51-550-2-1998 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 | (PLASTICS. POLYTETRAFLUOROETHYLENE (PFTE) SEMI-FINISHED PRODUCTS. PART 2 : PREPARATION OF SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 13000-2).) |
NF T51-550-1-1998 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和标识 | (PLASTICS. POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS. PART 1 : REQUIREMENTS AND DESIGNATION. (EUROPEAN STANDARD EN ISO 13000-1).) |
EN 60454-3-14-2001 | 电工用压敏粘带 第3部分:.单项材料规范 活页14:涂压敏粘合剂的聚四氟乙烯薄膜带 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive (IEC 60454-3-14:2001) |
EN 60684-3-145 bis 147-2001 | 绝缘软管 第3部分:各种型号软管规范 活页145至147:挤压聚四氟乙烯(PTFE)软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001) |
EN 61196-2-2003 | 射频电缆 规范 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice |
EN ISO 13000-1-1997 | 塑料 聚四氟乙烯(PTFE)半成品 第1部分:要求和命名 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997) |
EN ISO 13000-2-1997 | 塑料 聚四氟乙烯(PTFE)半成品 第2部分:试样的制备和性能的测定 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997) |
EN 751-3-1996+AC-1997 | 接触第1、2、3家庭用燃气和热水的金属螺纹接头的密封材料 第3部分:非烧结过的聚四氟乙烯密封带 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
EN 60684-3-240 bis 243-2002 | 绝缘软套管 第3部分:个别型号套管规范 活页240至243:热收缩聚四氟乙烯套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002) / Note: Endorsement notice |
UL 2006-1997 | 聚四氟乙烯1211的回收/再利用设备 | (Halon 1211 recovery/recharge equipment ) |
UL 2083-1996 | 聚四氟乙烯1301回收/再利用设备 | (Halon 1301 recovery/recycling equipment ) |
BS 2782-3 Method 327A-1993 | 塑料试验方法.第3部分:机械性能.方法327A:聚四氟乙烯制品抗拉强度与断裂伸长率测定 | Methods of testing plastics - Mechanical properties - Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products |
BS 6564-3-1990 | 聚四氟乙烯(PTFE)材料和制品.第3部分:填充聚四氟乙烯的E类玻璃纤维规范 | Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene |
JIS K6896-1995 | 模塑材料和挤压材料用的聚四氟乙烯粉末 |
Polytetrafluoroethylene powder for molding and extrusion materials |
JIS K6893-1995 | 聚四氟乙烯水分散体的试验方法 | Testing methods for polytetrafluoroethylene aqueous dispersion |
JIS K6895-1995 | 聚四氟乙烯零部件尺寸的测定方法 | Method for determination of dimension of polytetrafluoroethylene parts |
BS 3G 210-1996 | 单芯和多芯镀银铜导体(190℃)或镀镍铜导体(260℃)聚四氟乙烯绝缘设备软线和电缆规范 | Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) |
BS 5306-5.2-1984 | 住宅灭火装置及设备.第5部分:哈朗(聚四氟乙烯)灭火系统.第2节:哈朗(聚四氟乙烯)1211全溢流装置 | Code of practice for fire extinguishing installations and equipment on premises - Halon systems - Halon 1211 total flooding systems |
BS M 57-1985 | 航空航天用聚四氟乙烯高温盘旋状软管组件规范 | Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications |
BS M 56-1985 | 航空航天用聚四氟乙烯管密度和相对密度的测定方法 | Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications |
BS EN 60454-3-14-2002 | 电工用压敏胶带规范.各项材料规范.涂压敏胶粘剂的聚四氟乙烯薄膜带.第14活页:涂压敏胶粘剂的聚四氟乙烯薄膜 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polytetrafluoroethylene film tapes with pressure-sensitive adhesive - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
BS EN 60684-3-145 to 147-2001 | 绝缘软套管规范.各型套管规格要求.挤制聚四氟乙烯套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Extruded PTFE sleeving - Extruded PTFE sleeving |
BS EN 60684-3-240 to 243-2002 | 绝缘软套管.各种型号软套管规范要求.热收缩聚四氟乙烯(PTFE)绝缘软套管 |
Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable PTFE sleeving |
BS EN 61196-2-2003 | 射频电缆.规范.聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 | Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
BS EN ISO 13000-2-2006 | 塑料.聚四氟乙烯(PTFE)半成品.试样的制备和性能测定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties |
BS EN ISO 13000-1-2006 | 塑料.聚四氟乙烯(PTFE)半成品.要求和名称与符号 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Requirements and designation |
BS EN 4166-2005 | 航空航天系列.三件弹簧张力夹具.聚四氟乙烯轴衬 | Aerospace series - Clips, spring tension, three parts - PTFE bushes |
BS EN 1337-7-2004 | 结构轴承.球面和圆柱形聚四氟乙烯轴承 | Structural bearings — Part 7: Spherical and cylindrical PTFE bearings |
BS ISO 8829-2-2006 | 航空.聚四氟乙烯(PTFE)内软管组件试验方法.非金属编制物 | Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Non-metallic braid |
BS ISO 8913-2007 | 航空航天.轻型聚四氟乙烯(PTFE).分级:400 °F/3000 psi (204 ℃/20684 kPa)和204℃/21000 kPa (400 °F/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3000 psi (204 °C/20684 kPa) and 204 °C/21000 kPa (400 °F/3046 psi) - Procurement specification |
DIN ISO 7258-1987 | 航空航天.航空航天用聚四氟乙烯(PTFE)软管.密度和相对密度的测定方法.与ISO7258, 1984相同 | Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984 |
DIN 65374-1989 | 航空航天.聚四氟乙烯.(PTFE)半成品和模压件.技术规范 | Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification |
DIN 16782-2-1991 | 聚四氟乙烯(PTFE)模塑材料.试样的制备和性能测定 | Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties |
DIN 16782-1-1991 | 聚四氟乙烯(PTFE)模塑材料.分类和名称 | Polytetrafluoroethylene (PTFE) moulding materials; classification and designation |
DIN 28148-1992 | 搪瓷钢制搅拌容器的聚四氟乙烯外壳密封 | PTFE envelope gaskets for glass lined agitator vessels |
DIN 28091-3-1995 | 密封板的交货技术条件.第3部分:聚四氟乙烯基密封材料.要求和试验 | Technical delivery conditions for gasket sheets - Part 3: PTFE-based gasket materials (TF); requirements and testing |
DIN ISO 10502-1997 | 航空航天.温度为230℃以下气压为10500KPa时使用的聚四氟乙烯(PTFE)软管.采购规范 | Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992) |
DIN 3535-6-1999 | 供气用密封垫.第6部分:气阀、煤气设备和煤气主管道用基于合成纤维、石墨或聚四氟乙烯的密封垫材料 | Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains |
DIN 30660-1999 | 供气、供水及水暖设备用密封材料.家用设施金属螺纹连接用非硬化连接密封材料和聚四氟乙烯密封带 | Sealing materials for gas and water supply as well as water heating systems - Non-hardening jointing compounds and polytetrafluoroethylene (PTFE) tapes for metallic threaded joints in domestic installations |
DIN 2874-2002 | 带聚四氟乙烯或PFA衬里的钢制法兰管道和钢制与铸铁法兰配件.技术规范 |
Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications |
DIN EN 60454-3-14-2002 | 电工用压敏胶带.第3部分:各型材料规范.第14节:涂压敏粘合剂的聚四氟乙烯薄膜带(IEC 60454-3-14:2001) | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive (IEC 60454-3-14:2001); German version EN 60454-3-14:2001 |
DIN EN 60684-3-145 bis 147-2002 | 绝缘软套管.第3部分:专用型套管规范.145活页和147活页:挤制聚四氟乙烯(PTFE)套管 (IEC 60684-3-145 to 147: | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001); German version EN 60684-3-145 to 147:2001 |
DIN EN 60684-3-240 bis 243-2003 | 绝缘软管.第3部分:各型软管规范.240至243节:热收缩聚四氟乙烯(PTFE)绝缘软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002); German version EN 60684-3-240 to 243:2002 |
DIN EN 61196-2-2004 | 射频电缆.第2部分:聚四氟乙烯绝缘的半刚性射频电缆和同轴电缆分规范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995); German version EN 61196-2:2003 |
DIN EN 1337-7-2004 | 结构轴承.第7部分:球面和柱面聚四氟乙烯轴承 | Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2004 |
DIN EN ISO 13000-1-2006 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和名称与符号(ISO 13000-1-2005).德文版本 EN ISO 13000-1-2005 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005); German version EN ISO 13000-1:2005 |
DIN EN ISO 13000-2-2006 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 (ISO 13000-2-2005).德文版本 EN ISO 13000- | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005); German version EN ISO 13000-2:2005 |
IEC 61196-2-1995 | 射频电缆 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
IEC 60454-3-14-2001 | 电工用压敏粘带 第3部分:单项材料规范 活页14:涂压敏粘合剂的聚四氟乙烯薄膜带 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
IEC 60684-3-145 to 147-2001 | 绝缘软套管.第3部分:各种型号套管的规范.第145和147活页:挤压聚四氟乙烯套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving |
IEC 60684-3-240 to 243-2002 | 绝缘软管.第3部分:各种型号软管规范.第240至243篇:热收缩聚四氟乙烯(PTFE)绝缘软管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving |
ISO 7313-1984 | 航空器 聚四氟乙烯(PTFE)制的高温盘卷软管组件 |
Aircraft; High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
ISO 7258-1984 | 航空航天用聚四氟乙烯(PTFE)管材 密度和相对密度的测定方法 |
Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density |
ISO 10502-1992 | 航空航天.温度为230℃及以下、压力为10500 kPa下使用的聚四氟乙烯(PTFE)软管组件.采购规范 |
Aerospace; hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa; procurement specification |
ISO 9938-1994 | 航空航天 强度温度等级为204℃/28000 kPa的聚四氟乙烯软管组件 采购规范 |
Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/28 000 kPa - Procurement specification |
ISO 9528-1994 | 航空航天 等级为21000kPa/204℃标准型聚四氟乙烯(PTFE)软管组件 采购规范 |
Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21 000 kPa - Procurement specification |
ISO 13000-2-2005 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和性能的测定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties |
ISO 13000-1-2005 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和名称与符号 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation |
ISO 8829-2-2006 | 航空.聚四氟乙烯(PTFE)内软管组件试验方法.第2部分:非金属编织物 |
Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 2: Non-metallic braid |
ISO 8913-2006 | 航空航天.轻型聚四氟乙烯(PTFE)软管组件.等级:400℉/3000psi(204℃/20684kPa)和204℃/21000 kPa(400℉/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3 000 psi (204 °C/20 684 kPa) and 204 °C/21 000 kPa (400 °F/3 046 psi) - Procurement specification |
JIS K6884-1971 | 聚四氟乙烯的一般公差(机械切削) |
General tolerance for polytetrafluoroethylene (Machine cut) |
JIS K6892-1995 | 涂胶挤压用聚四氟乙烯粉料的试验方法 |
Testing methods for polytetrafluoroethylene powder for paste extrusion |
JIS K6891-1995 | 聚四氟乙烯模塑粉料的试验方法 |
Testing methods for polytetrafluoroethylene molding powder |
JIS K7137-1-2001 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求与命名 |
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation |
JIS K7137-2-2001 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:试验样品制备和性能测定 |
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties |
JIS K6885-2005 | 螺纹密封用未烧结聚四氟乙烯带 |
Unsintered polytetrafluoroethylene tapes for thread sealing |